Facilities List

The following is a list of equipment and capabilities of our shop:

  • State-of-the-Art turning centers capable of producing very tight tolerances
  • Turn/ Mill parts 3/8” to 8” dia
  • Milling, drilling, and tapping capability
  • Water-based Coolant
  • Many types of parts can be completed in 1 operation (Improving consistency and accuracy over parts going to a secondary operation)
  • T32-3, 640T Fusion, and new Matrix2 Controls feature fast, capable programming
  • Capto and WTO Hi Performance Live Tool attachments

CNC Machining Department

Mazak Integrex i200-ST Simultaneous 5 Axis CNC Machining Center
  • Spindle Chiller
  • Coolant Chiller
  • Glass Feedback scales (improved accuracy over traditional encoder positioning feedback)
  • 2-1/2″ Bar Thru Capacity with Bar Feeder
  • 2 Opposing Turning Spindles – 8″ 3 Jaw Kitigawa Chucks. Producing first and second side machining in one operation.
  • Twin Turrets – Machining w/ multiple tools simultaneously.
  • Upper Turret: Articulating 30HP, 12000 RPM Milling Spindle/Turning Turret. 72 Tools, 1000psi Thru Head Coolant
  • Features Capto spindle couple – most rigid tool holding coupling in the industry.
  • Lower Turret: 9 Turning Tool Capacity
  • Matrix2 Mazatrol/ EIA/ISO control
  • Capable of +/-.0002 tolerances on many features
  • Typical Part Size: 1/2″ to 8″ dia.
  • Full Milling, Drilling, Tapping capability on an plane, including simultaneous 5-axis machining.
  • C-Axis – Rotational (360 deg Position/Feeding) on both Turning Spindles (Indexing Chucks)
  • B-Axis – “Tilt” Axis for the Upper Turret – Making machined features on any Plane Angle possible.
  • Y-Axis – Milling/ Positioning Off Centerline (horizontal & vertical)
  • W-Axis – Subspindle Transfer and Positioning
  • 1000 PSI Coolant, Parts Conveyor
01mazak-integrex-i200-st

(2) Mazak Nexus QTN250MSY 5 Axis CNC Turning Center
  • Coolant Chiller
  • Glass Feedback scales (improved accuracy over traditional encoder positioning feedback)
  • 3″ Bar Thru Capacity
  • 10″ 3 Jaw Kitigawa Chuck – Main side
  • 6″ 3 Jaw Kitigawa Chuck – Sub Side. Producing first and second side machining in one operation.
  • 12 Position Turret (Live or Static)
  • Matrix Mazatrol/ EIA/ISO control
  • Capable of +/-.0002 tolerances on many features
  • Typical Parts diameters: 3/8″ to 8″ dia.
  • Horizontal/Vertical Milling, drilling, tapping capability
  • C-Axis – Rotational (360 deg Position/Feeding)
  • Y-Axis – Milling/ Positioning Off Centerline (horizontal & vertical)
  • B-Axis – Subspindle Transfer and Positioning
  • 1000 PSI Coolant, Parts Conveyor
02mazak-nexus-5-axis

Mazak SQT200MSY 5 Axis CNC Turning Center
  • 2″ Bar Thru Capacity
  • 8″ 3 Jaw Kitigawa Chuck – Main side
  • 22J Collet Chuck (Dead Length, 2-1/4″ Cap) – Sub Side. Producing first and second side machining in one operation.
  • 12 Position Turret (Live or Static)
  • 640T Fusion Mazatrol/ EIA/ISO control
  • Capable of +/-.0002 tolerances on most features
  • Typical Parts diameters: 3/8″ to 6″ dia.
  • Horizontal/Vertical Milling, drilling, tapping capability
  • C-Axis – Rotational (360 deg Position/Feeding)
  • Y-Axis – Milling/ Positioning Off Centerline (horizontal & vertical)
  • B-Axis – Subspindle Transfer and Positioning
03mazak-sqt200msy

Mazak SQT200MS 4 Axis CNC Turning Center
  • 2″ Bar Thru Capacity
  • 8″ 3 Jaw Kitigawa Chuck – Main side
  • 22J Collet Chuck (Dead Length, 2-1/4″ Cap) – Sub Side. Producing first and second side machining in one operation.
  • 12 Position Turret (Live or Static)
  • 640T Fusion Mazatrol/ EIA/ISO control
  • Capable of +/-.0002 tolerances on most features
  • Typical Parts diameters: 3/8″ to 6″ dia.
  • Horizontal/Vertical Milling, drilling, tapping capability
  • C-Axis – Rotational (360 deg Position/Feeding)
  • B-Axis – Subspindle Transfer and Positioning
04mazak-sqt200ms4

Mazak QT200Y 3 Axis CNC Turning Center
  • 2-1/2″ Bar Thru Capacity
  • 8″ 3 Jaw Schunk Chuck
  • Programmable Tailstock & Live Center for shaft type work
  • 12 Position Turret (Live or Static)
  • Smooth G control
  • Capable of +/-.0003 tolerances on most features
  • Typical Parts diameters: ½ ” to 6″ dia.
  • Horizontal/Vertical Milling, drilling, tapping capability
  • C-Axis – Rotational (360 deg Position/Feeding)
05mazak-sqt18m3

Dake Horizontal Automatic Bandsaw
  • 10″ Capacity
  • Minimum Material Remnants
  • Metal alloys and Plastics
  • Consistent and Square Cuts
06dake-horizontal-bandsaw

Hardinge Precision Manual Lathe
  • Making tooling/fixturing for shop use
07hardinge-manual-lathe

Bridgeport, 3 Axis Mill
  • Making tooling/fixturing for shop use
  • Newall 3 axis DRO
08bridgeport-3axis

Inspection Department

Zeiss Duramax CMM
  • VAST XXT Scanning Sensor
  • Calypso Simulation Software
  • E0/E40 in µm MPE according to ISO 10360-2:2009
  • 500mm x 500mm x 500mm
  • Complete Laser Arsenal Component Fixturing System
01mazak-integrex-i200-st

Mitutoyo PH-3500 Optical Comparator
  • 14″ Screen, 10x lenses
  • Quadra Check 200 measuring electronics (used to measure complex features)
  • Electronic Edge Detection
  • Customized w/ Fiber-Lite MI-150 Illuminator (improved surface illumination)
  • Annual Calibration traceable to NIST
01mitutoyo-ph3500

Mitutoyo QM 600 Height Gage
  • Measuring large parts and distances between feature
  • 24″ Measuring Capability
  • +/-.0001 Accuracy
  • Special Carbide tip assortment for difficult to measure features
  • Annual Calibration traceable to NIST
02mitutoyo-qm600

Mitutoyo Borematic 568 Digimatic Bore Gages
  • Range: 0.2750 – 4.0000″
  • Resolution: .00005″/0.001mm
  • Accuracy: .00020
03mitutoyo-borematic-568

Mitutoyo ID-C Digimatic Indicator (543-492B)
  • At every work center
  • Range: 0 – 2.000″
  • Resolution: .00005″/0.001mm
  • Accuracy: .00020
04mitutoyo-idc-digimatic

Universal Punch K1-20 Precision Concentricity Gage
  • Diameter Capacity: 3/8″ to 2″ (10mm to 50mm)
  • Length Capacity: ≤ 6″ (152mm)
  • Precision Accuracy: ≤ 2µm (.00008″)
05universal-punchk120

(4) MAHR-Federal Profilometer
  • Measures surface finish Ra, Rmax/Ry, Rt
  • ANSI-B46, ISO and MIL specifications
06mahr-federa-profilometer

Finishing Department

Overbeck High Speed Polishing Lathe – Model LT-1B
  • 2600 RPM Polishing Lathe
  • Operator uses various media pads to achieve finishes as low as 2Ra
01overbeck-hs-polishing-

Trumpf Trumark 5000 Laser Marker
  • Reliable and Precise Marking
  • Diode-pumped Fiber Laser (Yb-fiber)
  • X/Y programmable work table (300mm x 300mm)
  • Programmable Z axis focal distance
  • Programmable Rotary Indexer
  • Clean, Consistent Marker on Variety of Materials
  • Complete Laser Arsenal Component Fixturing System
01mazak-integrex-i200-st

Dapra Technomark Multi4
  • Alpha-numeric marking
  • Programmable character size
  • Discrete dot marking or continuous line fonts
  • Marking at angles, circular, straight line, mirror and italic marking
  • Serial Number module
02dapra-technomark-multi4

Branson Ultrasonic Cleaners
  • Removes contaminants from machine operations
  • Cleans parts brilliantly
03branson-ultrasonic-cleaners

UNI-POL 8″ Lapping Machine
  • Lap parts face to small flatness requirements
04unipol-lapping

Baldor 8” Buffer/Polisher
  • Creating uniform edge breaks
  • Polish to mirror finishes
05baldor-buffer

Cyclone 36” Bead Blast Cabinet
  • Trinco Med/Fine Glass Bead (applying light blasted finishes)
  • 100 Grit Black Silicone Grit (medium/aggressive deburring)
06cyclone-bead-blast-cabinet

Dake Arbor Press